Help Customers Cut Their Water Bills in Half——A Guide to Purchasing Water-Saving Toilets
Water scarcity has become an increasingly serious issue in many regions around the world, and the growing demand for water conservation has created vast market opportunities for the toilet wholesale industry. In American households and various commercial settings, bathrooms are a key area for water conservation—according to data from the U.S. Environmental Protection Agency (EPA), toilets are the primary source of indoor water use, accounting for nearly 30% of daily indoor water consumption—far exceeding other water-using activities such as showering and laundry. Meanwhile, older, inefficient toilets still in use on the market can consume as much as 3 to 7 gallons of water per flush, not only causing significant water waste but also driving up water bills for end users. Replacing these with high-efficiency, water-saving toilets has thus become a pressing market need.
Since 1992, U.S. federal law has mandated a maximum flush rate of 1.6 gallons per flush (GPF) for new toilets, establishing a clear standard for market entry. Thanks to continuous advancements in toilet manufacturing technology, high-efficiency water-saving toilets have undergone performance upgrades, achieving significant water savings without compromising flushing effectiveness or user comfort—perfectly aligning with the core needs of the end-user market.
This article will provide a detailed overview of water-saving toilets tailored for the U.S. market, helping wholesalers identify market needs, offer end customers practical, eco-friendly solutions that reduce water bills, and enhance their own market competitiveness.
1.Dual Flush Toilets
Dual-flush toilets dominate the global toilet import and export market due to their highly efficient water-saving performance. Unlike single-flush toilets with a fixed flushing mode, they offer two switchable options: a “Full Flush” for solid waste and a “Light Flush” for liquid waste, allowing for water conservation based on actual needs.
When specifying the water consumption ratings for dual-flush toilets, the industry standard is to list them in the order of “Full Flush rate + Light Flush rate.” Common specifications include: 1.6; 1.1 GPF, 1.6; 1.0 GPF, and 1.6; 0.8 GPF, among others.This design allows users to select the flush volume as needed, saving an average of 50% more water than traditional toilets, perfectly aligning with the core need of American households to “save water and reduce bills.”
It is worth noting that high-quality dual-flush toilets can be sourced directly from manufacturers in China. As a supplier with over 20 years of experience in bathroom fixture exports, OVS has also launched a range of dual-flush toilets tailored for the North American market. All products are WaterSense certified and feature various operating modes, including side-mounted flush and dual-flush options, balancing water efficiency with user convenience. With bulk availability and a comprehensive product range, we provide wholesalers with cost-effective, water-saving toilet solutions, helping them connect with the North American retail market and enhance their product competitiveness.
2. Low-flow Toilets
Low-flow toilets are a general term for water-saving toilets that use 1.6 gallons per flush (GPF) or less, consuming significantly less water than traditional toilets. Early models were criticized for poor flushing performance, but thanks to technological advancements, they now offer powerful flushing while balancing water conservation with performance.
When selecting a low-flow toilet, there are two options based on the flushing mechanism: gravity-flush and pressure-assist. Both have their pros and cons, so you can choose the one that best suits your needs.
Gravity-flush Toilets: Easier to maintain and offer good value for money
The gravity-flush system is the standard configuration for low-flow toilets. Its operating principle is simple: when the flapper or related mechanism in the tank opens, water flows from the tank into the bowl under the force of gravity, using the force of the water flow to carry away waste. This system has a simple structure, making maintenance and repairs more convenient and costs relatively lower, making it suitable for households that prioritize practicality and affordability.
Pressure-Assisted Toilets: Highly Efficient Cleaning, Powerful Flush
Pressure-assisted (also known as power-flush) systems use compressed air to force water into the toilet bowl, generating a flush force far greater than that of gravity-fed systems. Originally common in commercial settings, these toilets are now available for residential bathrooms. They are particularly suitable for homeowners who want a powerful flush while conserving water, ensuring effective waste removal with minimal water usage and maximizing the performance of low-flow toilets.
It is important to note that pressure-assist systems have a more complex structure, are relatively more difficult to repair, and typically operate noisier than gravity-flush toilets.
3.Find the Best Water-Saving Toilets for Your Customers
In addition to features that determine water-saving performance, when purchasing water-saving toilets for wholesale scenarios, it is essential to prioritize practical factors such as size compatibility, accessible design, installation height, and bowl shape to meet the diverse needs of various end customers (e.g., residential homes, apartments, and commercial spaces).
OVS offers bulk supply services covering a wide range of styles, including ADA-compliant toilets, one-piece toilets, and two-piece toilets. With a comprehensive product lineup and diverse specifications, we can fully meet various wholesale procurement needs, helping wholesalers efficiently connect with the end market and provide suitable water-saving toilet solutions for customers in different settings.
